Main Frame and Tender Frame Machined Parts
Part#	Quan	Description	Material	Reference
HM400	2	Frame Side Bar-Lower	9/16" square CRS bar, ~ 65" length each	Main Frame Design I
HM401	2	Frame Side Bar-Upper	9/16" square CRS bar, ~ 60" length each	Main Frame Design I
HM402	4	Frame Stiffener Plate-Rear	1/8" CRS plate, 10" X 3.1" piece each	Main Frame Design I
HM403	2	Frame Stiffener Plate-Center	1/8" CRS plate, 6.6" X 3" piece each	Main Frame Design I
HM404	4	Frame Stffener Plate- front	1/8" CRS plate,  11" X 3.5" piece each	Main Frame Design I
HM405	2	Frame Bolster	1.25" X 2.5" HRS  bar 9" long, 3/16" X 1.125" CRS Bbar 12" lomg\, 1" X 1" X 3/16" angle 7" long, 1.875' diameter CRS bar ~ 0.6" long.	Main Frame Design I
HM406	1	Smokebox Saddle	1.75"X2" CRS bar 10" long, 3/16"x2" bar ~20" long, 1/8" bar or plate 2.375" X9"	Main Frame Design II
HM407	1	Rear Sill	1"X1.75" CRS bar 16" long plus short pieses of 1/8" thick angle	Main Frame Design II
HM408	1	Coupler Link Swivel Pocket	1/2" X 1.25" HRS bar ~ 24" long.	Main Frame Design II
HM409	1	Tender Coupler Link	1.25" square CRS bar ~ 7" long	Main Frame Design II
HM410	2	Side Channel	1.5" X 1/2" X 1/8" channel ~24' long	Main Frame Design II
HM412	1	Front Sill Bracket	1.5" X 1/8" CRS bar ~13" long	Main Frame Design III
HM413	1	Front Coupler Support	~ 7" length of  1" square HRS bar, ~ 4" length of 1" X 2" HRS bar, scraps of 1/4" X 1" and 1/4" X 1.5" bar stock	Main Frame Design III
HM414	1	Frame Tray	1/8" steel plate 8.25" X 4.75" and 1/8" X 3/4" CRS bar  28" long	Main Frame Design III
HM415	1	Rear Boiler Support	1.75" X 1.5' X 3/16" Angle 14" long	Main Frame Design III
HM416	1	Front Boiler Support	1/2" X 1/2" X 1/8" angle 10" long	Main Frame Design III
HM417	2	Boiler Side Support	1/8" plate 3.6875" X 2.062", 3/8" X 3/4" CRS bar 2.062" long	Main Frame Design III
HH418	2	Frame Center Stiffener	1/8" plate 5.5" X 6.75", 1/8" X 1/2" bar ~ 42" length, 1/8' X 3/4" bar~12length.	Main Frame Design II
HM419	2	Frame Center Stiffener - Mod Bar	3/8' X 1/2" bar ~4" long	Main Frame Design III
HM420	2	Coupler Pocket	1" X 2.25" aluminum bar ~ 3' length. (One is used on Tender)	Main Frame Design III
HM422	1	Side Channel Support-Right	2" X 2" X 1/8" angle ~ 7" long	Main Frame Design II
HM423	1	Side Channel Support-Left	2" X 2" X 1/8" angle ~ 7" long	Main Frame Design II
HM424	2	Rear Bolster Stiffener	3/16" CRS bar ~3.5' long, 3/4"X3/4"X1/8" angle ~ 3.5" long	Main Frame Design I
HM425	1	Front Bolster Bracket- Right	3/16" CRS bar ~6.5' long, 3/4"X3/4"X1/8" angle ~ 3.5" long	Main Frame Design I
HM426	1	Front Bolster Bracket-Left	3/16" CRS bar ~6.5' long, 3/4"X3/4"X1/8" angle ~ 3.5" long	Main Frame Design I
HM430	2	Tender Frame Side	~ 42" lengths of 3/16" X 4" bar stock, 1" X 1" X 1/4" angle and 1.5" X 1.5" X 3/16" angle for both sides.   All HRS	Tender Frame Design
HM431	1	Tender Frame Bolster	~9.25" length of 1.25" X 2.5" HRS bar stock plus scraps of  1.875" diameter rod and 3/16" X 1" bar.	Tender Frame Design
HM432	1	Tender Frame Front	~16" length of 1/4" X 1.5" HRS bar stock plus scraps of 1/4" square stock.	Tender Frame Design
HM433	1	Tender Frame Rear	~16" length of 1/4" X 1.5" HRS bar stock.	Tender Frame Design
HM434	1	Tender Front Coupler Support	~ 13" length of 1" square HRS bar stock plus scrap of 1/4" X 1.25" bar stock	Tender Frame Design
HM435	1	Tender Rear Coupler Support	~ 8" length of  1" square HRS bar, ~ 4" length of 1" X 2" HRS bar stock, scraps of 1/4" X 1.25" and 1/4" X 1.5" bar stock	Tender Frame Design
HM436	1	Tender Link Coupler Pocket	~ 2.5' length of 1.87" X 2" HRS bar plus scraps of 3/16" thick bar or plate stock.	Tender Frame Design